Touch Controller - CALEFFI CONTECA EASY ULTRA Manual

755010
CONTECA
®
The function of the controller is to acquire, via bus, all the totalised
values of the individual users (heating/ cooling units / mass / zone valve
opening hours), user operating status (ON/OFF), totalised values from
the additional pulse meters (domestic cold/hot water) and operational
diagnostics.
All the abovementioned totalised values are recorded on a daily basis
in log files that are useful for consumption analysis and the division of
expenses.
Maximum number of users: 250.
Electric supply: 230 V (ac) ±10 % - 50 Hz - 60 W.
Ambient conditions: 10–35 °C with no dust.
N.B.: User data MUST be submitted to Caleffi before
commissioning can take place.
DATA CENTRALISATION

TOUCH controller

Includes:
- 1 touch-screen CPU
- 1 wall mounting rack
The controller has the following
features:
- 1 touch-screen LCD monitor for
reading consumption and user
data
- 1 RS-485 port
- 2 USB ports
- 1 LAN port
- GSM modem + M2M SIM
managed by Caleffi S.p.A.
- acquisition software
- instruction manual
750350
DATA EASY TELE datalogger
The device is used to acquire and log the data originating from
CONTECA EASY meters via communication bus. The integrated
®
web interface can be used to read consumption values and
instant data, generate reports and, if applicable, consult the
reading log. When associated with a UMTS router, it allows
remote management of the CONTECA
The router for the DATA EASY datalogger has an Access point
function for LAN management. If it has an M2M* data SIM (not
supplied by us) and is connected to the DATA EASY system, it offers
dynamic IP management via Dyn DNS. It allows the system to be
used to its full potential, by using a browser to remotely manage the
entire network of CONTECA
Maximum number of users: 250.
* We recommend activating the M2M SIM with FLAT control with
a minimum traffic threshold of 500 MB/month, with bandwidth
suppression/limitation when the threshold is exceeded.
Datalogger specifications:
- Electric supply: 24 V (dc) ±10 %, 24 V (ac) - 3 W.
- 2 Ethernet outputs: ETH1 (PoE), ETH2.
- Working temperature range: 0-50 °C.
- Mounting: 35 mm DIN rail (EN 60715).
- Data log storage: 10 years.
- Reports: XLS or CSV format.
- Transmission method: FTP (Client), Webserver.
UMTS router:
- Electric supply: 100-240 V (ac) / 9 V (dc) - 7 W.
- LAN: Wireless AP, 4-port switch router with firewall.
- Dimensions: (H x W x D) 36 x 85 x 100 mm (mounting on horizontal
plane).
- Certification: CE, EN 60950-1.
750450
DATA EASY datalogger
The device is used to acquire and log the data originating from
CONTECA EASY meters via communication bus. The integrated
®
web interface can be used to read consumption values and instant
data, generate reports and, if applicable, consult the reading log.
The main settings can be carried out locally via the web interface,
by connecting a PC to one of the two Ethernet ports with switch
functionality.
The SMART function allows the user to automatically recognise devices
connected to the network. Data can be acquired and consumption
reports created automatically, complete with the unit of measurement
and a description, with other activities carried out by the user removed.
Maximum number of users: 250.
Datalogger specifications:
- Electric supply: 24 V (dc) ±10 %,
24 V (ac) - 3 W.
- 2 Ethernet outputs: ETH1 (PoE), ETH2.
- Working temperature range: 0–50 °C.
- Mounting: 35 mm DIN rail
(EN 60715).
- Data log storage: 10 years.
- Reports: XLS or CSV format.
12
EASY network.
®
EASY heat meters.
®