Side Panel Components - D-Link DXS-3410 Series Hardware Installation Manual

DXS-3410 Series Layer 3 Stackable Managed Switch Hardware Installation Guide

Side Panel Components

The side panels feature components like rack-mounting screw holes, heat dissipating fans and vents.
The fans are capable of automatically adjusting their speed based on the IC sensor's temperature readings. This
feature is highly sensitive, enabling precise control of the internal temperature by accurately regulating the fan speed.
The following table lists at what ambient temperature the speed of the fan(s) will change:
Fan Mode Fan Status
Normal mode Ultra Low
Very Low
Low
Medium
High
Quiet mode Ultra Low
NOTE: When the Quiet Mode is enabled, ports 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, and 24 will be
disabled.
Figure 2-7 DXS-3410-32XY/32SY Side Panels
DXS-3410-32XY
Below 12°C
Above 15°C (Ultra Low to Very Low)
Below 27°C (Low to Very Low)
Above 30°C (Very Low to Low)
Below 35°C (Medium to Low)
Above 38°C (Low to Medium)
Below 42°C (High to Medium)
Above 45°C
Can only be enabled if below 30°C. Returns to Normal mode is above 30°C.
6
DXS-3410-32SY
Below 17°C
Above 20°C (Ultra Low to Very Low)
Below 27°C (Low to Very Low)
Above 30°C (Very Low to Low)
Below 37°C (Medium to Low)
Above 40°C (Low to Medium)
Below 42°C (High to Medium)
Above 45°C