Advertisement
L...._9- About Leveling firsE
NOTE
Making small adjustments
between doors.
If the door of the freezer is lower than that of the
refrigerator.
Adjustment part
Please open the doors and adjust then as follows:
If the door of freezer is higher than that of the
refrigerator.
!]
1) Releasethe nut (d)) on the lower hinge until it reaches the upper end of the bolt (@).
\djustment
part
@
NOTE
when
you release the nut(C), use enclosed heX wrench (@)to turn the bolt(@)in a slightly
counterclockwise direction. This will enable you to turn the nut(@) loose with your fingers.
d, NUT
,'_;, N UT
,'2', B OLT
(2,BOLT
2) Please adjust the height differencebetween the doors by turning the bolt (@)clockwise( _
) or counter
clockwise ( _
).
@
when you turn cl0ckwise (-,_,,._)i
the d0orgoes upl
NOTE
,;, WRENCH
,_ WRENCH
(_2Xl BOLT
(_2Xl
BOLT
J
3) After adjusting the doors, the nut ((_)turn clockwise ( "_J
) until it reaches the lower end of the bolt, then
tighten the bolt again with the wrench (®) to fix the nut(@).
f
,;, WRENCH
,_ WRENCH
..... _ii_ii/iii_i_!i!i_iiiii
.
,
::.
,'_:, N UT
\
(2:,BOLT
NOTE
d;, NUT
12:, BOLT
i
If y0Udo not fix the nut (@)firmly, the bolt (@)maybe releaSed.
25
Advertisement
