Arts (Auto Range Transpond System); Dtmf Paging System - Vertex Standard VX-P820 Series Operating Manual

A
DVANCED
TX Mode
Press the assigned programmable key to select the
TX mode. Available selections are:
TX Mixed: The VX-P820/-P870 transmits in
the Analog Mode, when after receiv-
ing the analog signal. Meanwhile,
the VX-P820/-P870 transmits in the
Digital Mode, when after receiving
the digital signal.
TX Digital: The VX-P820/-P870 transmits in
the Digital Mode.
TX Analog: The VX-P820/-P870 transmits in
the Analog Mode.
VX-P820/-P870 S
ERIES
O
PERATION
O M
PERATING ANUAL
ARTS
( A
R
UTO ANGE
This system is designed to inform you when you and
another ARTS-equipped station are within commu-
nication range.
During ARTS operation, when the radio receives the
correct ARTS signal, a short beep will sound and the
"In" (meaning "In Service" notation will be displayed
on the sub-LCD. If you move out of range for more
than two minutes, your radio senses that no signal
has been received; three short beeps will sound, and
"Out" ("Out of Service") will be displayed on the
sub-LCD. If you subsequently move back into range,
as soon as the other station transmits, a short beep
will sound and "In" will be displayed again on the
sub-LCD.
DTMF P
AGING
This system allows paging and selective calling, us-
ing DTMF tone sequences.
When your radio is paged by a station bearing a tone
sequence which matches yours, your radio's squelch
will open and the alert will sound. The three-digit
code of the station which paged you will be displayed
on your radio's LCD.
)
T S
RANSPOND YSTEM
S
YSTEM
23