Advertisement
3
Mount Panel
DRILL HOLES
Mounting to studs: Drill 1/8" pilot holes in the four
locations marked above.
Mounting to drywall:
If mounting to drywall with no studs behind it, en-
large pilot holes to 3/16" for anchors (included with
the relay panel).
Gently tap anchors into the holes.
4
General Wiring Information
!
L
LIVE ELECTRICAL COMPONENTS!
During installation, testing, servicing, and troubleshoot-
ing of this product, it may be necessary to work with live
electrical components. Failure to follow all electrical safety
precautions when exposed to live electrical components
could result in death or serious injury.
Wires may enter the Relay Panel through openings
on each corner and at the center of each side.
Necessary wire lengths should be considered when
determining entry points.
4
1/8" for screws
into studs
3/16" for drywall
anchors
WARNING
Attach base to wall using four screws provided. Do
not overtighten.
CAUTION
L
!
CAUTION: EQUIPMENT DAMAGE HAZARD - Improper
wiring can lead to equipment damage. Follow the terminal
connection information carefully to ensure the control is
wired properly. After wires are secure, bare wires
MUST NOT touch each other. See the Field Wiring Dia-
grams for specific system applications.
Wires may
enter at
any of 8
locations
18-HD68D1-3
Advertisement
