Table of Contents
Advertisement
1. Speedometer gear unit
2. Lift the wheel up between the fork
legs.
TIP
Make sure that there is enough space
between the brake pads before insert-
ing the brake disc and that the slot in
the speedometer gear unit fits over the
retainer on the fork leg.
Periodic maintenance and adjustment
1. Speedometer gear unit
2. Retainer
3. Speedometer cable
3. Install the wheel axle.
4. Lower the front wheel so that it is
on the ground, and then put the
sidestand down.
5. Tighten the wheel axle to the
specified torque.
Tightening torque:
Wheel axle:
59 N·m (5.9 kgf·m, 43 lb·ft)
6. Tighten the front wheel axle pinch
bolt to the specified torque.
Tightening torque:
Front wheel axle pinch bolt:
20 N·m (2.0 kgf·m, 14 lb·ft)
7-37
7. While applying the front brake,
push down hard on the handle-
bars several times to check if the
front fork compresses and re-
bounds smoothly.
8. Connect the speedometer cable.
7
Advertisement
Table of Contents
Troubleshooting
