Device Disconnect - Tait TP9300 Manual

6. Select a second device and follow the radio UI prompts until it is also connected
(Add to my headsets).
Navigate to 'Bluetooth' and select 'Manage devices'. There should now be two devices
7.
in the list. If they happen to use the same name add a '1' and '2' to each device name
respectively.
8. Press and Hold F2 Programmable PTT and verify Radio B transmitted audio is
received on Radio A. Release the F2 Programmable PTT and verify Radio A stopped
receiving audio.
Navigate to 'Bluetooth' and select 'Manage devices' and select a different Bluetooth®
9.
device then repeat steps 8 and 9.
TP3350
1. Power-on all Bluetooth® devices and ensure they are in pairing mode (as per
manufacturer's instructions).
2. On Radio B, search devices (Menu > Accessories > Bluetooth > My devices > Search
devices).
3. Follow the radio UI prompts until one device is connected.
4. Disconnect the device (Menu > Accessories > Bluetooth > My devices > [Connected
device name] > Disconnect).
5. Search for the new device (Menu > Accessories > Bluetooth > My devices > Search
devices).
6. Select a second device and follow the radio UI prompts until it is also connected.
Navigate to 'My devices' (Menu > Accessories > Bluetooth > My devices). There
7.
should now be the two devices in the list.
8. Press and Hold PTT and verify Radio B transmitted audio is received on Radio A.
Release PTT on Radio B and verify Radio A stops receiving audio.
Navigate to 'My devices' and select a different Bluetooth® device then repeat Step 8.
9.
1.5.2
Purpose: Verify Bluetooth® device(s) can be disconnected but remain paired with Tait
portable radio.
TP9300/9400/9500/9600
1. Power-on both Radio A and Radio B.
Put an unpaired Bluetooth® Device into pair mode (as per manufacturer's instructions)
2.
with Radio A.
3. Press F4 on Radio A.
4. Follow the radio UI prompts until the device is connected.
TN-2817c-AN

Device Disconnect

www.taitradio.com Page 6 of 14