Packing List - Craftsman 320.39590 Operator's Manual

• Do not discard the packing material until you have carefully inspected and
satisfactorily operated the tool.
If any parts are damaged or missing, please return the tool to the place of purchase.
PACKING LIST
Random orbit sander, 3 sandpapers (grit 60,120,220),dust bag and operator's manual.
,&
WARNING: To prevent accidental starting that could cause serious personal
injury, always disconnect the sander from the power source when assembling
parts, making adjustments, installing or removing sandpaper, cleaning, or when
it is not in use.
TURNING THE SANDER ON/
OFF (Fig. 2)
To turn on the sander, connect
the plug to an electrical outlet,
and then depress the side of the
rocker switch marked "l".
To turn it off, depress the side of
the rocker switch marked "O". The
integrated pad brake will quickly
stop the spinning pad when the
sander is turned off.
ATTACHING THE
SANDPAPER
(Fig. 3)
WARNING: Always inspect the
sandpaper before attaching. Do
not use if broken, torn or defective.
1. Disconnect the sander from
the power source.
2. Place the random orbit sander
upside down on a flat surface.
3. Remove any dust or debris
from the sanding pad.
4. Align the holes of the
sandpaper with the holes in the
sanding pad and firmly press
the sandpaper against the
sanding pad to ensure a good
attachment.
Fig. 2
Fig. 3
11
On/Off rocker switch
Sandpaper
Sanding pad
I