How To Install Phoenix Connector And The Adapter (Optional) - ASROCK iEP-7020E Series User Manual

3.11 How to Install Phoenix Connector and the Adapter (Op-
tional)
1. Insert white (+) cable of the adapter into the left port of the phoenix connector, and
insert the black (-) cable into the middle port. Ensure the cables are inserted to the end.
2. Tighten the left two screws from the top of the phoenix connector with a flathead
screwdriver. Ensure the cables are inserted to the end and cannot be unplugged.
black (-)
white (+)
V+ V-
iEP-7020E Series
black (-)
white (+)
V+ V-
59