Picture Tube Removal .0 - Sony TRINITRON KV-X2581A Service Manual

KV-X258
2-6. PICTURE TUBE REMOVAL
Clip ©) DGC clips
Claw Sh
© Degaussing coils
® ee SS
@) Deflection yolk
Four PT screws (M) 4
is
@) Anode cap :
Cushion
¢ REMOVAL OF ANODE-CAP
Note: Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon paint on the CRT, after removing the anode.
* REMOVING PROCEDURES. :
q@ Turn up one side of the rubber cap in @ Using a thumb pull up the rubber cap G) When one side of the rubber cap is
the direction indicated by the arrow@) firmly in the direction indicated by the separated from the anode button, the
arrow () anode-cap can be removed by turnin g
up the rubber cap and pulling it up in
® HOWTO HANDLE AN ANODE-CAP the direction of the arrow ©
GQ) Don't damage the surface of anode-cap with sharp
shaped material !
@) Don't press the rubber hardly not to hurt inside of
anode-caps !
A metal fitting called as shatter-hook terminal is built into
the rubber.
G3) Don't turn the foot of rubber over hardly !
The shatter-hook terminal will stick out or damage the rubber.
—16—