Advertisement
Quick Links
DIVING MEASUREMENT
●
The watch measures the current depth, maximum depth, diving time and time submerged,
and indicates them with the four hands for diving measurement and the small hands at the 6
o'clock position.
HOW TO READ THE MEASUREMENTS
● Current depth: Indicated by DEPTH and 1/10 m hands
● Maximum depth: Indicated by MAX. DEPTH hand
● Diving time: Indicated by DIVING TIME hand up to
12 hours.
(Ex. 17 minutes)
● Time submerged: Indicated by small hands at the 6
in 0.1 m increments from 1.6 m up to
55.0 m. (Ex. 12.5 m)
in 0.5 m increments from 1.5 m up
to 55.0 m. (Ex. 20.5 m)
o'clock position. (Ex. 10:10)
11
Advertisement
Related Manuals for Seiko 7K52
Summary of Contents for Seiko 7K52
- Page 1 DIVING MEASUREMENT ● The watch measures the current depth, maximum depth, diving time and time submerged, and indicates them with the four hands for diving measurement and the small hands at the 6 o’clock position. HOW TO READ THE MEASUREMENTS ●...
- Page 2 HOW TO USE THE DIVING FUNCTION Before diving, check the hands for diving measurements. Press button B repeatedly. Log data Log data of Diving hands of the the dive at “0” last dive before last position 0.0 m 1.6 m Diving measurement starts when you descend to 1.6 m or more.
- Page 3 Case I Case II Diving measurement stops when you ascend to less than 1.6 m. Rapid ascent warning ! Case I : If you stay at less than 1.6 m underwater for more than 10 minutes, the dive is considererd to be completed. Case II : If you descend again to 1.6 m or more underwater before 10 minutes have elapsed, the two dives are considered...
- Page 4 ● Before starting a dive, be sure to check that the hands for diving measurement are reset to “0” position. If not, reset them following the procedure in “ADJUSTING THE HAND POSITION BEFORE DIVING”. ● When you ascend to a depth less than 1.6 m underwater and the watch stops measuring the depth, the DEPTH and 1/10 m hands indicate “0.0 m”.