Maintenance And Care - Kärcher K 2.21 M Operating Instructions Manual

Finish operation
Caution
Only separate the high-pressure hose from
the hand spray gun or the appliance while
there is no pressure in the system.
After working with detergent, suspend
detergent suction hose in a container
filled with clear water, switch the appli-
ance on for around 1 minute once the
spray lance has been removed and
rinse until water runs clear.
Release the lever on the trigger gun.
Turn off the appliance "0/OFF".
Turn off tap.
Detach the appliance from the water
supply.
Press the lever on the trigger gun to re-
lease any remaining pressure in the
system.
Lock the lever on the trigger gun.
Pull out the mains plug.
Roll up the power cord and loop it e.g.
round the handle.
Insert the trigger gun in its holder.
Insert spray lances in their holder.
8
English

Maintenance and care

Danger
Turn off the appliance and remove the
mains plug prior to any care and mainte-
nance work.
Maintenance
The appliance is maintenance-free.
Storage
Prior to longer periods of storage, e.g. in
the winter:
Completely drain all water from the ap-
pliance: Switch the appliance on with
detached high-pressure hose and de-
tached water supply (max. 1 minute)
and wait, until no more water exits at the
high-pressure connection. Turn off the
appliance.
Remove filter from suction hose for de-
tergent and clean under running water.
Pull out the sieve in the water connec-
tion using flat-nose pliers and clean un-
der running water.
Frost protection
Caution
Protect the appliance and its accessories
against frost.
The appliance and its accessories can get
destroyed through frost if there are any wa-
ter residues in them. To avoid damage to
them:
Store the appliance and the entire ac-
cessories in a frost-safe room.
Spare parts
Use only original Kärcher spare parts. You
will find a list of spare parts at the end of
these operating instructions.