Related Manuals for Royal Sovereign RAF-C120
Summary of Contents for Royal Sovereign RAF-C120
- Page 1 Owner’s Manual Auto-Feed Shredder RAF-C120 Please read and retain these instructions. Royal Sovereign International, Inc. To register your product, please go to www.royalsovereign.com...
-
Page 2: Table Of Contents
Thank you for purchasing the Royal Sovereign 120 Sheet Auto-Feed, Cross-Cut Shredder, RAF-C120. This manual will provide you with safety information, instructions for optimal use, and proper care and maintenance for your product. Please read this manual carefully before operating. -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS When using this machine follow these safety precautions to reduce risk of fire, electric shock, or injury. WARNING For your safety, this machine should be properly grounded on a level surface indoors only. The machine should be placed near the electrical outlet so that the outlet is easily accessible. Make sure the voltage meets the machine’s electricity requirements (115 - 120 volt / 60 Hz). - Page 4 SAFETY INSTRUCTIONS When using this machine follow these safety precautions to reduce risk of fire, electric shock, or injury. CAUTION Do not attempt to shred materials other than paper or credit cards. Do not shred plastic (except credit cards), newsprint, cardboard, paperclips, labels, tape, envelopes, or anything with glue or adhesives. Do not shred greeting cards with sound chips or batteries.
-
Page 5: Product View
PRODUCT VIEW Top Safety Cover Auto-Feed Entry Manual Feed Entry Master Power Switch Indicator Lights Control Buttons Pull-Out Basket Window Caster Wheels... -
Page 6: Control Panel
CONTROL PANEL Bin Full Motor Overheat / Power On Indicator Overload Indicator Indicator Master Power Switch Forward Button ON/OFF Button Reverse Button Bin Full: This indicator light will inform the user when the bucket is full and needs to be emptied. If the light appears, the machine will stop running and will require the user to empty the bin before continuing to shred. -
Page 7: Product Operation
PRODUCT OPERATION ON/OFF Place shredder on a flat, level surface. Plug the power cable into the wall power outlet. Turn the master control switch ON Master Power (located under the lip on the top side of the Switch unit). Next press the “ON/OFF” button (located on top of the shredder). - Page 8 PRODUCT OPERATION Auto-Feed Entry (Continued) When the stack of paper is completely shredded, the motor will stop running. It is recommended that you remove all staples from paper before shredding. This unit will cut staples to a maximum of 10 stapled sheets. Insert non-stapled side of paper first into the Auto- Feed Entry.
-
Page 9: Troubleshooting
TROUBLESHOOTING Symptom Solutions • Ensure that the shredder is plugged in. • Ensure that the “ON/OFF” master switch is on. The shredder does not turn • Ensure that the “ON/OFF” button is pushed down (ON setting). Ensure that the pull out bin is properly inserted all the way. •... - Page 10 • Open the top safety cover and remove any jammed paper. NOTE: Do not attempt to repair the shredder yourself. NOTE: For all replacements and repairs that need to be made, contact Royal Sovereign at +1) 800-397-1025...
-
Page 11: Specifications
SPECIFICATIONS RAF-C120 MODEL Cross-Cut Shred Type 8.86 in. (225 mm) Entry Width 13.12 ft. (4 m) per minute Speed 6.6 Gallons (25 L) Bin Capacity 60 Minute ON / 30 Minute OFF Duty Cycle (Auto Feed) Security Rating 4 x 20 mm... -
Page 12: Warranty
Return defective product, in original packaging, to the address below. Royal Sovereign International, Inc. requires reasonable proof of your date of purchase from an authorized retailer or distributor. Therefore, you should keep your receipt, invoice, or canceled check from the original purchase. The limited warranty shall be limited to the repair or replacement of parts which prove defective under normal use and service within the warranty period.