HP V24b User Manual page 13

• Connect one end of an DisplayPort cable to the DisplayPort connector on the rear of the monitor
and the other end to a DisplayPort connector on the source device.
4. Connect one end of the power cord to the monitor and the other end to a grounded AC outlet.
WARNING! To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed) AC outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the AC outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one may
accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging the power cord
from the AC outlet, grasp the cord by the plug.
NOTE: Connector locations may vary.
1 Getting Started 7