Advertisement
Installation
Note:
R The handset display may show "Please wait for 1 minute." when the
handset is placed on the charger if it is not registered to the base unit.
R If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends (
charge again.
Registering the handset to the base unit
Ensure that the handset is switched on. If it is not on, press and hold MOFFN for few
seconds to turn the handset on.
1
Handset:
Lift the handset and press MOFFN.
2
Base unit:
Press and hold M
R If all registered handsets start ringing, press M
3
Handset:
Place the handset on the base unit or charger.
R Continue the operation even when the handset display shows "Please
4
With the handset still on the base unit or charger, wait until a confirmation tone
sounds and
Note:
R If an error tone sounds, or if
the base unit's operating instructions.
4
TGDA30E(en-en)_1225_ver021.pdf
TGDA30E(en-en)_1225_ver021.pdf
,
N for about 5 seconds.
this step.
wait for 1 minute.".
is displayed.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
4
4
1
) and the charge contacts with a dry cloth and
N again to stop, then repeat
is displayed, register the handset according to
2
2014/12/25
2014/12/25
13:57:45
13:57:45
Advertisement
