Technics SX-KN200 Manual page 87

Part IV
Function setting mode
Initializing the function settings
m KN200
When the keyboard is turned off, all of the stored
memories of the SEQUENCER and settings for
MIDI, the foot switch, etc. are erased and return
to their factory-preset (initialized) status.
m KN400
The various memory contents and settings of the
SEQUENCER, COMPOSER, MIDI, foot switch,
etc. remain in the internal memory of the instru-
ment for about one week even after the POWER
button is turned off. To reset all the memories
and settings to their factory-preset status (initial-
ized settings), follow the procedure below.
1. Press the POWER button to turn off the instru-
ment.
POWER
OFF J ON =
C)
26
2. While depressing all three MANUAL PERCUS-
SION buttons, press the POWER button to turn
on the instrument.
MANUAL PERCUSSION
CILJD