Dell NOT22427 Owner's Manual page 134

Table 37. System setup options—System information menu (continued)
Overview
64-Bit Technology
Memory Information
Memory Installed
Memory Available
Memory Speed
Memory Channel Mode
Memory Technology
DIMM_SLOT B
DIMM_SLOT A
Devices Information
Panel Type
Video Controller
Video Memory
Wi-Fi Device
Native Resolution
Video BIOS Version
Audio Controller
Bluetooth Device
LOM MAC Address
Pass Through MAC Address
Cellular Device
dGPU Video Controller
Table 38. System setup options—Boot Configuration menu
Boot Configuration
Boot Sequence
Boot Mode: UEFI only
Boot Sequence
Enable Secure Digital (SD) Card Boot
Secure Boot
Enable Secure Boot
Enable Microsoft UEFI CA
Secure Boot Mode
Expert Key Management
Enable Custom Mode
Displays whether 64-bit technology is used.
Displays the total computer memory installed.
Displays the total computer memory available.
Displays the memory speed.
Displays single or dual channel mode.
Displays the technology used for the memory.
Displays the DIMM B memory size.
Displays the DIMM A memory size.
Displays the Panel Type of the computer.
Displays the video controller type of the computer.
Displays the video memory information of the computer.
Displays the wireless device information of the computer.
Displays the native resolution of the computer.
Displays the video BIOS version of the computer.
Displays the audio controller information of the computer.
Displays the Bluetooth device information of the computer.
Displays the LAN On Motherboard (LOM) MAC address of the computer.
Displays the pass through MAC address of the computer.
Displays the M.2 PCIe SSD information of the computer.
Displays the name of the discrete video controller.
Displays the boot mode of this computer.
Enables to set the boot order.
Enable or disable the SD card read-only boot.
Default: Disabled
Enables secure boot using only validated boot software.
Default: ON
Enables Microsoft UEFI CA.
Default: ON
Changes to the Secure Boot operation mode. Allows to switch between
Deployed Mode and Audit Mode.
Default: Deployed Mode
Allows the PK, KEK, db, and dbx security key databases to be modified.
BIOS Setup 133