Table of Contents
Advertisement
Connect to a Computer
(USB)
The User Manual and drivers are stored on the
internal memory of the PicoPix - use a microUSB
cable to connect the Projector to a computer to
access these files.
In this way, you are able to copy files back and
forth between the internal memory, an inserted
memory card and the computer.
1.
Switch the device on using the POWER
button.
2.
After switching on the device the main menu
appears.
3.
Connect the micro-USB plug to the Pocket
Projector and the USB plug to the computer.
Notice
You cannot use the memory for media
playback when the Pocket Projector is
connected to a computer via USB.
4.
If a memory card has been inserted, it will be
displayed as another disk drive.
5.
You can move, copy or delete data from the
computer, the memory card (if inserted) and
the internal memory.
Philips PPX4935
19
Advertisement
Table of Contents
