Speaker Phone; Pause Feature; Answering A Call; 3-Way Calling - Audiovox CDM-8615 Owner's Manual

BASIC FUNCTIONS

SPEAKER PHONE

The speaker phone feature lets you hear audio through the speaker and
talk without holding the phone.
C 1
To activate the speaker phone in idle, answering
H
or calling modes, press and hold
2
2
The phone returns to normal (speaker phone off)
after ending a call or when the phone is turned off
and back on.

PAUSE FEATURE

Pauses are used for automated systems (i.e., voice mail, calling cards).
Insert a pause after a phone number then enter another group of
numbers. The second set of numbers is dialed automatically after the
pause. This feature is useful for dialing into systems that require a code.
1
To insert a pause, enter a phone number then
press [MENU]. Select either a Hard Pause
("P" appears) or a Timed Pause ("T" appears).
2
Press to dial or
number.
Please refer to page 30 for more details about
storing a phone number.
.
[SAVE] to store the
22
BASIC FUNCTIONS

ANSWERING A CALL

1
To answer a call, press any key except
or .
l By pressing
Key" or "Send Key" to answer a call. lf "Send Key" is selected,
the phone can only be answered by pressing
See page 73 for more information.
2
To end the call, press
In Auto Answer Mode a call is automatically answered after a
preset number of ring tones. See page 74 for more details.

3-WAY CALLING

With 3-Way Calling, you can talk to two people at the same time.
When using this feature, the normal airtime rates will be applied for
each of the two calls.
1
Enter the number you wish to call then press
2
Once you have established the connection,
enter the second number you wish to call then
press .
3
When you're connected to the second party,
press again to begin your 3-Way call.
If one of the people you called hangs up during your call, you
and the remaining caller stay connected. If you initiated the call
and are the first to hang up, all three callers are disconnected.
23
, ,
C
, you can select either "Any
H
2
.
.
.