Advertisement
KRC-851D
22
MECHANISM DESCRIPTION
2.
PACK
DOWN
When
the load gear (38) further rotates@, the action
arm (21) also rotates Oro lower the action plate (14) ...
O. by way of the action plate spring (87) .. ©.
3.
Change from load gear to mode gear
When
the load gear (38) further more rotates
@ , the
boss under it pushes against the boss of the mode gear
(43)... ® , 80 that the mode gear (43) rotates after the
shift of its non-toothed section... ® '
Thus, the load gear (38) stops rotation on account of its
non-toothed section coming.
4.
REW
When the mode gear (43) rotates @ , the FR plate (26)
under it moves @. The cam of the FR plate (26) works
to rotate the FR arm (24)... @.
Further, the FR arm (24) moves to transmit the rotation
of the flywheel (8) to the reel gear (31)... @
At this time, a slot (REW
hole) of the FR plate (26) is
detected by the mode sensor (PH3)... ®. to stop the
rotation of the sub motor.
For REW or FF, due to the groove of the FR plate (26) ...
@®). the head plate (805) advances @ so that the head
moves to a position at which T-ADV is feasible.
A
72S
7
ae
38
PH3
Advertisement
