Denon DCM-360 Service Manual page 16

i DCM-360/260
DCM-360/2¢
Symbol
| Dar 1 | Bias terminal for DSL.
Ground for oscitting circuit.
AN8805SB (C100)
frame clock signal output {ICLDCK=7.35kH2
[63 [FOLK
| © _| Crystal frame clock output (IFCLK=7 25k).
Interpolation fag output (H": interpolation).
|_65_| FLAG
| 66 _|
).
g
3 5
oO
o
z
Co
S
2/3 |s
2
Hid
Deemphasis detecting signal output ('H":ON).
(*H™. synchronous, "L": synchronous come off}.
a
8
8
i
a |
i
Q
fl
8
g
| _—_| Capacitor connecting terminal for RF.
Test terminal (normally "H').
C.EA
| — __| Capacitor connecting terminal for AMP.
Power supply for analog circuit (Audio output using both as Lch and Ach).
€.SBD0 | _— __| Capacitor connecting terminal for low speed detection of dark level DO detection.
GND. i
ENV output terminal.
VCC x 0.5(V) output terminal.
input terminal of LD APC forcible stop.
Output terminal of vibration detection.
Input terminal of vibration detection.
'Output terminal of TE CROSS detection signal.
Output terminal of TEAMP.
Output terminal of FEAMP.
Connect to PIN diode F.
Rich output,
y RSEL
| RF signal polarity selective terminal {RSEL="H" at brightness level
"H". RSEL="L" at brightness level "L').
7 «| CSEL
Crystal oscillating frequency selective terminal (normally "L*).
\ Fest terminal (normally "L")
22