Sony BRAVIA XR65X95LU Manual page 130

Table of Contents

The TV cannot connect to the Internet/Network.

If the wireless network does not connect or disconnects, try the following.

Press the

(Quick Settings) button on the remote control and check that the following

setting is enabled.

[Settings] — [Network and Internet] — [Wi-Fi]

Check the installation location of the TV and wireless router. Signal condition may be

affected by the following:

Other wireless devices, microwaves, fluorescent lights, etc., are placed nearby.

There are floors or walls between the wireless router and TV.

Turn the wireless router off and then on again.

If the network name (SSID) of the wireless router to which you want to connect is not

displayed, select [Add new network] to enter a network name (SSID).

If the problem is not resolved even after the procedures above or if you cannot connect even

with a wired network, check the status of the network connection.

Checking the status of the network connection

Press the

[Settings] — [Network and Internet] — [Network status] — [Check

Connection].

Check your network connections and/or server's instruction manual for connection

information, or contact the person who set up the network (network administrator).

Hint

The solution varies depending on the network status check. For solutions based on

each issue, see "Frequently Asked Questions" on the Sony Support Site.

Note

If the LAN cable is connected to an active server and the TV has acquired an IP

address, check your server's connections and configurations.

Press the

(Quick Settings) button on the remote control, then select [Settings] —

[Network and Internet] — [Network status].

Table of Contents