Table of Contents
Advertisement
INSTALLATION
Caution
Before starting the machine up, the packing
must be removed as follows:
Note
You are advised to keep all the packing
for re-use in case the machine has to
be transported again.
Lay the machine gently on its back, making
sure that the hoses are not squashed.
Remove the polystyrene block from the
bottom of the machine. Fig. 1.
Fig 1
Place the machine in the upright position,
with the rear of the machine facing you.
Fig. 2. (Transit bars marked 'A').
Unscrew the 4 large bolts holding the transit
bars, with the spanner provided. Fig. 3.
B
Fig 3
Unscrew the 8 small screws holding the
transit bars to the cabinet. These must be
refitted into the machine after the removal
of the transit bars, Fig. 4, see also Fig. 6.
Fig 4
Remove the transit bars and slide out the
4 plastic pins. See Fig. 5.
Advertisement
Table of Contents
