Related Manuals for AirLink Communications 5200
Summary of Contents for AirLink Communications 5200
-
Page 1: Application Note
Application Note for connecting the AirLink Raven CDPD Modem to Ethernet Devices using the IP 5200 from DCB March 2002 AirLink Communications, Inc. Confidential Material - Not For Redistribution... - Page 2 THIS DOCUMENT CONTAINS CONFIDENTIAL MATERIAL AND IS NOT INTENDED FOR REDISTRIBUTION. Information contained herein is the property of AirLink Communications, Inc. and is produced for the purpose of detailing technology developed by AirLink Communications, Inc. and its employees. Reproduction or distribution of this document without the express written consent of AirLink Communications, Inc.
-
Page 3: Table Of Contents
AirLink Application Notes CONTENTS 1. OVERVIEW... 4 2. INTERNET (TCP/IP) CONNECTION VIA CDPD... 4 3. ETHERNET DEVICE & IP5200 CABLING & INSTALLATION ... 4 4. IP5200 CONFIGURATION ... 5 5. AIRLINK RAVEN CDPD MODEM CONFIGURATION ...11 AirLink Communications Page www.airlink.com... -
Page 4: Overview
2. Internet (TCP/IP) Connection via CDPD Normally, remote access to an IP 5200 is done via Dialup Telephone Line. When using CDPD, remote access to is done via a TCP/IP connection to the CDPD Network (ie: Internet) and the use of a CDPD Modem connected to a DCBNet IP5200 Single-Port Async-Router. -
Page 5: Ip5200 Configuration
Main Menu. AirLink Communications 166.x.x.1 192.168.1.100 Private Class-C IP Addresses are on same subnet using subnet mask 255.255.255.0. RJ-45 1 2 3 4 5 Power £ £ ¤ ¤ ¤ Jack Page AirLink Application Notes Ethernet Crossover Cable 192.168.1.101 www.airlink.com... - Page 6 ‘0’. This will make sure the IP5200 does not drop the PPP connection when the serial port is idle. AirLink Communications Page AirLink Application Notes Multi-port Usage Even though IP5200’s serial ports can be used for...
- Page 7 AirLink Application Notes Since there actual Internet Account when connecting CDPD Modem, you can leave the User Name, Password, and IP Address allocated by ISP left blank. DNS should be the same as entered previous screen. No Script File is needed.
- Page 8 AirLink Application Notes Select Modem option. Selecting the ‘Properties’ button will take you to the Modem Properties screen. The Modem setup screen has four requirements: - Initial String should be ‘AT’ - Serial Line Speed = 19200 - Dial Type = Other - Dial String = ‘ATDT’...
- Page 9 To put the Ethernet port outside the IP5200, you must set the device up as an Exposed Computer. Select Enable Exposed Computer Feature enter the IP of the Ethernet device. In this case it is 192.128.1.101. AirLink Communications Page AirLink Application Notes www.airlink.com...
- Page 10 AirLink Application Notes Checking to see if the router works is easy. Go to the Port Status page on the Main Menu and Select the Dial-Up button. You can watch the Log for entries and errors, and see the Physical Link and PPP Link status right on the screen.
-
Page 11: Airlink Raven Cdpd Modem Configuration
5. AirLink Raven CDPD Modem Configuration The following are the proper S-Register configurations for the AirLink Raven CDPD Modem when connecting to the IP5200 for making a PPP connection. These settings can be made using Wireless ACE. CDPD Parameters: [S110] Device Port=12345...