Summary of Contents for Universal Remote PCL-300
- Page 1 Instruction Manual PCL-300 PC Upgrade Link (MX-650 and MX-350 Archiving) ™ COMPLETE COMPLETE CONTROL Universal Remote Control ®...
- Page 2 PCL-300 PC Upgrade Link Instruction Manual © 2005 Universal Remote Control, Inc. The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc.
-
Page 3: Table Of Contents
Introduction Installing the Software Connecting to either the MX-350 or the MX-650 Uploading a Configuration from the Remote to the PC Downloading a Configuration from the PC to the Remote 8 Utilizing the Blank Files in the Samples Folder Utilizing Live Update Warranty Specifications ABLE... -
Page 4: Introduction
Introduction Thank you for purchasing the Complete Control PCL-300 PC Upgrade Link. The PCL-300 does not enable you to make any changes to an MX- 650 or MX-350 configuration via the PC. All programming is done on the remote control. Nor does the PCL-300 allow you to convert an MX-650 configuration to an MX-350 configuration or vice versa. -
Page 5: Installing The Software
Installing the Software The software can be installed from the CD included with the PCL-300 or downloaded from our website www.universalremote.com. WARNING! Do not connect the PCL-300 to your PC until installation is finished as described below: Install from CD 1. - Page 6 5. Allow the installer to install all files. 6. Click Finish to exit the Setup window. 7. Start the PCL-300 software and con- nect the PCL-300 to an empty USB port. Windows will open the Found New Hardware Wizard window.
- Page 7 8. Select “Install the Software Automatically” and click on Next. 9. Allow the wizard to search for the USB driver. 10. Click on Finish to exit the wizard. PCL-300 PC U PGRADE Page 4...
- Page 8 Installing from a Download 1. Open your internet browser and navigate to the Complete Control Downloads page at www.universalremote.com. 2. Select the PCL-300 software to download. 3. Click on Run to install the software. 4. When the Security Warning appears, click on Run.
-
Page 9: Connecting To Either The Mx-350 Or The Mx-650
Orient the connector of the PCL-300 so that the filled in pin will match the pin pattern of the socket inside the remote control. 3. Carefully fit the plug from the PCL-300 into the socket on the remote control. PCL-300 PC U... -
Page 10: Uploading A Configuration From The Remote To The Pc
MX-650. Once it has identified the model, the Environment message will correctly identify the connected remote. Click on the Upload but- ton to begin the upload process. 3. The window displays the progress as the file is uploaded. PCL-300 PC U PGRADE Page 7... -
Page 11: Downloading A Configuration From The Pc To The Remote
The software now identifies whether it is connected to an MX-350 or an MX-650. Once it has identified the model, the Environment message will correctly identify the connected remote. Pull down the Download list and select the type of download you would like to do. PCL-300 PC U PGRADE Page 8... - Page 12 3. Once you’ve selected the type of download, click on the Download button. 4. The window will display the progress as the file is downloaded. PCL-300 PC U PGRADE Page 9...
-
Page 13: Utilizing The Blank Files In The Samples Folder
The files are installed with the software in the following directory: C:/Program Files/Universal Remote Control/PCL300/Samples Notes on the MX-650Blank.pcl Configuration: 1. All device names are erased 2. -
Page 14: Utilizing Live Update
Utilizing Live Update The PCL-300 software can be updated with new IR code sets for the remote control’s database and new firmware. To obtain the latest IR data- base and firmware, simply connect to the internet in your normal way, then open PCL-300 software. -
Page 15: Warranty
Warranty The PCL-300 is covered against any manufacturing defects or faults in workmanship for a period of one year from the date of purchase when purchased from an authorized Complete Control dealer. Units purchased from online auction sites or other unauthorized resellers have no warranty. - Page 16 ™ COMPLETE COMPLETE CONTROL Universal Remote Control ® 500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.com...