Replacing The Batteries; Programming The Mx-450 - Universal Remote Complete Control MX-450 User Manual

Replacing the Batteries

Open the battery cover by pressing the release and pulling back the cover
on the back of the control. Remove the cover.
Observe the + and - polarity indications inside the battery compartment.
Place the four AA batteries into their positions in the battery compartment,
observing the + and - polarity indicators on the batteries.
Now, replace the battery cover by inserting the hinged end in first, then
snapping the cover back into place.

Programming the MX-450

To fully automate an audio/video system, the programmer must have a
detailed knowledge of each component and how the system is connected
and operated. We highly recommend that you use a professional
audio/video installer to program your MX-450 so you will be able to
enjoy all the benefits of the MX-450.
Programming Options
The MX-450 is programmed via on-screen setup menus. Simply press and
hold the MAIN button for 3 seconds to view the menus:
Basic Setup:
Advanced Setup: Do not attempt Advanced Setup until you have com-
Favorite Channels: Do not attempt to setup Favorite Channels until you
User Settings:
Display Tips:
MX-450 O
Selecting this option enables you to replace all your
remotes by either searching the built in database or
learning commands one at a time from the original
remote for the device.
pleted Basic. Advanced Setup enables you to copy and
paste groups of commands like Volume and Mute,
setup macros, customize labels, add/hide pages, erase
and setup RF Addressing.
have completed Basic. Favorite channels are macros
that enable you to tune to a channel with one touch.
Selecting this option lets you adjust how long the
screen or the buttons stay lit.
Select this option to turn on or off the built in Setup
Tips. Setup Tips are the programming manual for the
MX-450. They appear on the screen in context.
Page 3
M
WNERS ANUAL