Connections And Operations For Viewing The Picture Played Back On Your Tv - Hitachi VM-E543LE Instruction Manual

CONNECTIONS AND OPERATIONS FOR VIEWING THE PICTURE PLAYED
BACK ON YOUR TV
To play back a tape recorded on your camera/recorder and view it on your TV receiver, you must con¬
nect the camera/recorder to the TV receiver using either audio/video output cable or RF output adaptor.
Example 1: If your TV has SCART jack or AUDIO/VIDEO IN jacks.
Aerial
I
NOTE: If the camera/recorder is connected as
illustrated, the quality of the picture and sound
is better than the connection using the RF out¬
put adaptor (Example 2).
To "AUDIO IN (L)" (White)
To Aerial Terminal jfiw.
To "VIDEO IN" (Yellow)
To "SCART" Jack
To "VIDEO" (Yellow) foRj
To "AUDIO OUT"
(White)
"VIDEO OUT"
(Yellow)
AV Plug Adaptor
To "AUDIO L/MONO" (White)
Audio/Video Output Cable
(provided)
1. Connect the TV and camera/recorder as illus¬
trated above.
NOTE: If your TV has two (stereo) audio
inputs, connect the audio plug to the left-chan¬
nel audio input on the TV.
2. Turn on TV and select video input.
3. Insert the cassette.
4. Slide the CAM/OFF/VIDEO switch to "VIDEO".
5. Press the PLAY button.
6. After playing press the STOP button.
35