Table of Contents
Advertisement
Using the EL-6190 for the First Time
Be sure to perform the following operation before using the EL-6190 for the first time.
[1] Pull out the insulation sheet. (Fig. 1)
(This
sheet
was
inserted
at
the
factory
to
prevent
battery wear.
Operation of the EL-6190 begins when it
is pulled out.)
Press IĊ-CE) to turn the power on.
Press the RESET switch on the back. (Fig. 2)
[4] Press ISHIFTIJENTERJ.
[5] Set the date and time of the clock. (Refer to page 9.)
When Abnormal Conditions Cause a Malfunction
If the EL-6190 is subjected to strong, extraneous electrical noises or shocks during use, an
abnormal
condition
may
occur in which no keys (including
[ECE] ) will respond.
If this
happens,
press the RESET
switch
on the back of the EL-6190
and any
key other than
SHIFT] [ENTER].
If an error
occurs
internally, "DATA
PROBLEM"
and "PRESS. RESET!"
are displayed
alternately.
Clear all memory by performing
steps
and
above.
. The above operation may clear ail memory and reset the clock.
Advertisement
Table of Contents
