8 133A Pulse Generator Specifications
Internal Clock
External Clock
Specifications describe the instruments warranted performance after
30 minute warm-up period, with ambient temperature in the range
0 t o 55'C, and 50
load resistance at all outputs.
Non-warranted characteristics are described as 'typical' or 'nominal'.
All timing parameters are measured at 50% of amplitude.
You can set the internal clock in terms
External Input
You can apply an external clock signal to the External Input:
Frequency Range:
Input Coupling:
Impedance:
Minimum
Swing:
Maximum
Amplitude:
of frequency or period:
33 MHz
3 GHz
t o
ac-coupled
50
<
300 mV, rise-time
3
0
HP
813311 Pulse Generator Specifications
a
2-1