Advertisement
Available languages
Available languages
Notes:
@ Maintenance
of the heads
The
head
assembly,
capstans
and
pinch
rollers should
be
cleaned after about each 10 hours of use in order to maintain
good sound quality.
1. Cleaning with a cotton swab
"(df the 'parts. are
very dirty, use a
"small
amount of
© alcohol on the cot-
ton.swab.)
iat: Record/play head
Erase head
2. Cleaning with a head-cleaning tape cassette (optional)
1) Insert the cassette into the tape holder.
2) Switch
on the power
supply
in accordance
with the
procedure for tape operation described, and then press
the play button. The surface of the heads will be cleaned in
a few seconds.
m@ Head demagnetization
The head assembly should be demagnetized after about each 50
hours of use in order to maintain good sound quality.
The head assembly becomes
magnetized, causing noise in
recordings and unwanted erasure of valuable recordings, if a
magnetized screwdriver or other metal tools come near the head
assembly, and when the heads have been used for a long period
of time.
If the heads become
magnetized, use a head demagnetizer
(option).
Note:
When demagnetizing the head assembly, be sure to first push
the power switch to release it outward
(m1)
to the ''off"
position.
Advertisement
