Installing Your Phone; Charge The Battery - Uniden EZi2996 User Manual

Charge the Battery

) Unpack all handsets, battery packs, and battery
covers. If any battery cover is already on
the handset, press in on the notch and slide
the cover down and off.
) Connect the base
AC adapter
to the
AC IN 7.8V
jack on the
back of the
base. Route
the cord
through the
molded wiring
channel as
shown.
) If you have accessory handsets, connect
a charger AC adapter to each charger's
jack and set the plug into the
AC IN 8V
notch as shown. (These adapters might
already be connected.)
) Plug the other end of each adapter into
a standard 20V AC power outlet.

Installing Your Phone

Black Black
Red Red
2) Line up the red and black wires on the
battery pack with the label inside the
handset.
) Push the battery pack connector in
until it clicks into place. Tug gently
on the wires to make sure the battery
pack is securely connected.
) Place the cover over
the battery
compartment and
slide it up into place.