Table of Contents
Advertisement
Location
This cooker has"X"-type protection
against overheating of the surrounding
surfaces.
It may be installed close to a side wall
which is higher than the hob, provided
a minimum distance of 300 mm is
maintained (see fig. 3).
The furniture walls adjacent to the cooker
must be made of material resistant to heat.
The veneered syntetical material and the
glue used must be resistant to a
temperature of 120°C in order to avoid
ungluing or deformations.
The cooker may be located in a kitchen, a
kitchen/diner or bed-sitting room but not
in a room containing a bath or shower.
Curtains must not be fitted immediatly
behind appliance or within 500 mm of the
sides.
It is essential that the cooker is positioned
as stated opposite.
6
Before use
Please ensure that all packing has been removed
from the appliance before switching on.
Preparing the ovens
Fig. 4
Clean the upper and lower ovens
using for the first time; use water and soap, then rinse
carefully. Hook the side frames (fig. 4 and 5) to the
side walls and then insert the shelves and grill pan
into the shelf guides provided in the side frames.
Once you have done this heat the oven and the grill
element for about 30 minutes to eliminate any resid-
ual factory grease that might impart unpleassant
smells to the meals to be cooked.
IMPORTANT
As a safety measure, before you start to clean
Fig. 5
the oven, switch off the electrical supply.
Fig. 3
thoroughly before
Advertisement
Table of Contents
