Advertisement
Model Plate
Figure 1-1
Sample Model Number
6 1 9
1 3 A M
G 0 0 0
Indicates Model Series 600
Figure 1-2
Rear Mount Weight Kit
The Model 218 Rear Mount Weight Kit is designed for
use on all MTD Step-thru™ series tractors.
NOTE: An adapter kit (753-05585) is available for
installation of this weight kit on 700 series riders. Call
Customer Support at (800) 800-7310. Have your model
number and serial number available when you call.
The instructions in this manual are divided into sections.
Carefully read all sections and study the illustrations to
ensure proper installation and usage of this attachment.
NOTE: References to LEFT and RIGHT indicate the left
and right sides of the tractor when facing forward in the
operator's position. Reference to the FRONT indicates
the grille end; to the REAR, the rear end of the tractor.
Determine The Model
of Your Rider
Since this manual is designed for installation of this
weight kit system on several different rider units, it is
important for you to determine which model of rider you
have. Therefore you will know which set of instructions in
the following pages to follow.
To determine which model of rider you have, you will
need to locate the rider's model plate, located under the
seat. Simply flip the seat up and locate the model plate,
which will consist of an 11 digit/letter model number
and a serial number. For ease in this installation and
for future use, copy your rider's model number & serial
number below now:
Rider Model Number:__ __ __ __ __ __ __ __ __ __ __
Rider Serial Number:_________________________
The 5
, 6
& 7
numbers from the left in your model
th
th
th
number determine your rider's model series. See Fig.
1- 2.
When you fill in your model number in the space above,
the actual model series number should fall into the gray
shaded area.
Now that you have determined what model rider you are
attaching this grass bag collection system to, follow the
instructions on the following pages according to your
model of rider.
3
1
Rider Model
Identification
NOTE:
References to LEFT
and RIGHT indicate
the left and right
sides of the tractor
when facing forward
in the operator's
position. Reference to
the FRONT indicates
the grille end; to the
REAR, the rear end of
the tractor.
Advertisement
