Tv Controls - Sony BRAVIA KDL-40V2500 Operating Instructions Manual

Basic Operations
TV Controls
= VOLUME + = CHANNEL +
PIC OFF/TIMER
[] MENU Press to display MENU with TV functions and settings (see "Overview of MENU" on page
23).
[] =_.- Press to cycle through the video inputs. If you set a certain input to
Skip
in Label Video
T{7/VIDEO
Inputs,
then the input will not appear.
In the MENU screen, this button -'- serves to confirm the selection or setting.
i
[] ÷ ,_ Press to adjust the volume. In the MENU screen, these buttons serve as left/right buttons.
- VOLUME +
[] ,I, t_" Press to scan through channels. To scan quickly through channels, press and hold down either
- CHANNEL + -/+. In the MENU screen, these buttons serve as up/down buttons.
[] POWER Press to turn on and off the TV.
[] (IR)
Infrared
Receives IR signals from the remote control.
Receiver/
Senses room light level and adjusts the screen brightness accordingly (see page 33 for details).
Light
Sensor Do not put anything near the sensor, as its function may be affected.
[] PIG OFF/ Lights up in green when the Picture Off feature is activated. Lights up in orange when the
TIMER LED
timer is set. When the timer is set, this LED will remain lit even if the TV is turned off. For
details, see page 33.
[] STANDBY LED Lights up in red when your TV is in PC standby mode. If the LED blinks in red continuously,
this may indicate the TV needs servicing (see contacting Sony information on page 2).
[]
POWER LED
Lights up in green when the TV is turned on.
[] Speaker Outputs the audio signal.
:!
22