Contents Welcome/Accessibility..2 Terminology/Manual.Conventions...3 Product.Overview...4 Controls.and.Functions...5 Installing.the.Phone...7 Choosing the Best Location ... 7 Installing the Rechargeable Battery Packs into the Handsets ... 8 Installing the Base Unit and Charging Cradle ... 9 Mounting the Base Unit on a Wall ... Register.Handsets.to.the.Main.Base.before..
AutoTalk, AutoStandby and UltraClear Plus are trademarks of Uniden America Corporation. Accessibility Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer service assistance or if you have any questions about how Uniden’s products can accommodate persons with disabilities, please call the accessibility voice/TTY line: -800-874-934.
Charger A cradle that charges the handset battery. It connects to power but does not connect to a phone line. Caller ID is available from your telephone provider. With this service, you can see the name and number of incoming callers.
Product.Overview Main.Phone.Features • 2.4 GHz Extended Range Technology • Dual-Handset System (Extra Handset & Charger Included) • Call Transfer from Handset to Handset • Caller ID/Caller ID on Call Waiting • 3-Line Backlit LCD • Trilingual Menu Displays (English, Spanish, or French) •...
Page 7
Main.Base.Unit Extra.Charging.Cradle 8. in.use/ (in use/charge) LED / Voice mail waiting indicator (flashing) 9. [find] key 20. Base charging contacts 2. Base DC.IN.9V jack 22. TEL.LINE jack 23. Charging contacts (charge) LED 25. Charging cradle DC.IN.9V jack...
• The base should be placed in an open area for optimum range and reception. • If your home has specially wired alarm equipment connected to the telephone line, be sure that installing the system does not disable your alarm equipment. If you have questions about what will disable your alarm equipment, contact your telephone company or a qualified installer.
3) Make sure you have a good connection by slightly pulling on the battery wires. If the connection is secure, the battery jack will remain in place. 4) Place the battery case cover back in the handset by sliding it upwards until it clicks into place. Note:.Use.only.the.Uniden.(BT-1006).rechargeable.battery.pack.supplied. with.your.phone.
Installing.the.Base.Unit.and.Charging.Cradle ) Connect each AC adapter to the DC.IN.9V jack and to each standard 20V AC wall outlet. Note:. •..Use.only.the.supplied.AD-0001.AC.adapter.for.the. base.unit.and.AD-310.or.AD-1010.for.the.charging. cradle..Do.not.use.any.other.AC.adapter. •..Do.not.place.the.power.cord.where.it.creates.a. trip.hazard.or.where.it.could.become.chafed.and. create a fire or electrical hazard. 2) Charge the handsets by placing one handset in the base unit and the other in the charging cradle with the keypad facing forward.
Page 11
•. Charge.your.handsets.at.least.15.-.20.hours.before.plugging.into.the. phone.line.. 4) Once the handset battery packs are fully charged, connect the telephone line cord to the TEL.LINE jack and a telephone outlet. If your telephone outlet isn't modular, contact your telephone company for assistance. LED illuminate. If the LED does not...
2) Plug the AC adapter into a standard 20V AC wall outlet. 3) Plug the telephone line cord into the TEL.LINE jack. 4) Route the telephone line cord through the groove as shown. 5) Plug the telephone line cord into the telephone outlet.
Page 13
) Insert two mounting screws into the wall (with their appropriate anchoring device), 3-5/6 inches apart. Allow about /8 of an inch between the wall and screw heads for mounting the phone. 2) Refer to steps through 6 on page to mount the telephone.
Register.Handsets.to.the.Main.Base.before.Using! Both handsets will need to be registered to the main base unit before use. Whichever handset you choose to charge in the base unit will automatically register to the base unit. The handset charging in the extra charging cradle MUST also be registered to the base unit before use.
When.to.Re-register.Handsets In some cases, it may be necessary to re-register your handsets. To re-register your handsets, please follow registration steps outlined on page 3. Re-registration is required in the following scenarios: ) You’ll need to re-register both handsets (follow steps on page 3) each time the digital security code is changed. (Refer to page 32 for details regarding the Digital Security Code.) 2) When there is a power failure for more than one hour: If power failure occurs (e.g.
Basic.Setup There are five basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code, Dial Mode and Language. CIDCW and Dial Mode options can only be set by using Handset . If you try to set by using other handset, you will not see these options listed on the LCD screen. (You can easily identify Handset shows as HS1 will be seen in the display while the phone is charging.) AutoTalk, Area Code and Language options can be set by using any handset.
Programming.Your.Area.Code In some areas the telephone company may allow you to place a local call by dialing only 7 digits (instead of 0). If this is the case in your area, you can program your local area code in your phone. Programming your area code will allow you to see the caller’s 7-digit phone number which will allow you to easily return the local call without...
Choosing.the.Dialing.Mode.(HS1.only) Your phone can communicate with the telephone network in two different ways: tone dialing and pulse dialing. These days, most telephone networks use a method called tone dialing, so your phone comes programmed for tone dialing by default.
2) Press [vol/ / ] to move the pointer to select DIAL. 3) Press [select/channel] to set the phone to pulse dialing. 4) Press [end] and return the handset to the base unit to complete the setting. The handset returns to standby. Note:.
Using.the.Speed.Dial.Memory Your cordless phone allows you to store up to 0 names and numbers in each handset. You can dial these numbers with just a few key presses. The speed dial memory is not limited to phone numbers. You can store any number (up to 20 digits) that you need to enter once your call connects.
Page 21
4) Enter a name according to the instructions below, then press [select/channel]. If no name is required, go to step • The name can be up to 3 characters. • Use [ /tone/ ] and [#/ ] to move the cursor to the desired location. •...
Page 22
If.you.make.a.mistake.while.entering.a.name Use [ /tone/ ] or [#/ ] to move the cursor to the incorrect character. Press [delete/transfer] to erase the wrong character. Then enter the correct character. To delete all characters, press and hold [delete/transfer]. 5) STORE NUMBER is displayed. The cursor flashes indicating that the phone is ready for the number to be entered.
Storing.Caller.ID.in.Speed.Dial.Memory Caller ID names and numbers shown in the Caller ID list can be stored in speed dial memory. To store a caller id name/number to memory: ) With the phone in standby, press [cid/menu]. Select the phone number to be stored from the Caller ID list by pressing [vol/ / ] or [vol/ / ].
Using.Your.Phone Making.and.Receiving.Calls Handset.on.the.cradle ) Pick up the handset from the cradle. 2) Press [talk/flash]. 3) Listen for the dial tone. Making.a.call 4) Dial the number. ) Pick up the handset from the cradle. 2) Dial the number. Then press [talk/flash]. ) Pick up the handset from the cradle.
Caller ID number, press [3]. 3) Press [talk/flash]. The displayed phone number dials automatically. Note:. • You can also press [talk/flash] before you access the Caller ID list. When you come to the phone number you want to dial, press [select/channel]. •..You.cannot.make.a.call.from.the.Caller.ID.list.if.your.cordless.telephone.is.connected.to.a.private. branch.exchange.(PBX).
Transferring.a.Call Your cordless phone allows you to transfer outside calls from one handset to another. Only one handset at a time can talk with an outside caller. While one handset is in use, the other cannot go off hook to listen to conversations or make an outgoing call.
Redialing.the.Last.Dialed.Number ) Pick up the handset from the cradle. 2) Press [talk/flash]. 3) Listen for the dial tone. 4) Press [redial/pause]. Selecting.the.Ring.Tone.and.Volume Your phone has five different ringer tone/volume combinations you can choose from. To select the ringer: ) With the phone in standby, press [vol/ / ] or [vol/ / ]. 2) The phone will sound the different ring tones at different volumes.
Using.Call.Waiting If you subscribe to Call Waiting through your local telephone company, you can receive calls while on the line. To answer a call waiting call: ) While on the phone, you will hear a call waiting tone. (If you have CIDCW service activated, you will see the name and number of the incoming caller.
When this particular call ends, the phone automatically returns to pulse dialing mode. Voice.Mail.Waiting.Indicator If you subscribe to voice mail service through your local telephone company, you can use your cordless telephone to access your voice mailbox. The.voice.mail.company.will.provide.you.with.the.access.number. The in.use/ LED on the base of your phone flashes whenever you have messages waiting in your voice mailbox.
You.must.subscribe.to.Caller.ID.services.through.your.local.telephone.provider.to.use.these.features. When the telephone rings, the Caller ID feature allows you to view the caller’s name, phone number, date and time of call. The incoming call information is stored in the Caller ID record. If the Caller ID service includes the caller’s name, the caller’s name appears on the display (up to 5 letters).
Caller.ID.on.Call.Waiting.(CIDCW) If you subscribe to CIDCW offered by your telephone company, you will hear a Call Waiting tone while you are on a call, and the Caller ID data will be displayed at the handset. To accept the waiting call, press [talk/flash] (see page 27).
Deleting.Information.from.the.Caller.ID.List If the phone receives more Caller ID messages than it can store, the oldest one in the list is automatically deleted. Caller ID data can also be deleted manually. Deleting.a.Caller.ID.message ) Press [cid/menu] in standby. Find the message to be deleted from the Caller ID list by pressing [vol/ / ] or [vol/ / ].
If this happens, a new security code is set automatically the next time the battery pack is charged. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code.
Specifications, features, and availability of optional accessories are all subject to change without prior notice. Power.Failure During the period that the power is off, you will not be able to make or receive calls with the telephone. -0°C to +50°C (+4°F to +22°F) For.the.base...
Page 35
Complete your conversation as quickly as possible and return the handset to the cradle for charging. Note:.Information.stored.in.the.phone's.memory.will.be.retained.for.30.minutes.after.the.battery.pack. is.removed..This.includes.all.setup.information,.last.number.dialed,.speed.dial.memory,.and.the.CID. list. Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum performance, be sure to return the handset to the cradle after a telephone call.
Page 36
With normal usage, your battery should last about one year. To order replacement batteries, please contact Uniden’s Parts Department. The contact information is listed on the back cover page.
Troubleshooting Traveling.Out-of-Range During a call, as you begin to move your handset too far from your base unit, noise increases. If you pass the range limits of the base, your call will terminate within one minute. Common.Issues If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve your problem, please call our Customer Hotline.
Page 38
• Change the digital security code (see page 32). • Make sure that the handset is not too far from the base. • Check the dialing mode used by your telephone company. • Re-register both handsets (see page 3). • The battery pack may be weak. Charge the battery for 5-20 hours.
Page 39
The Caller ID does not • Charge the handset. display. • Your Caller ID service may not be active; contact your local telephone service • Make sure the battery pack is connected to the handset and fully charged. A handset is not working.
DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven. After following these steps, if your cordless telephone does not work, please call our Customer Service Hotline. See back cover page for contact information.
• RBRC ® is a registered trademark of the Rechargeable Battery Recycling Corporation. Uniden works to reduce lead content in our PVC coated cords in our products and accessories. Warning! The cords on this product and/or accessories contain lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual.
Page 43
To minimize damage from these types of surges, a surge arrestor is recommended. Changes or modifications to this product not expressly approved by Uniden, or operation of this product in any way other than as detailed by the owner's manual, could void your authority to operate this product.
TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference.
WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below.
Index AC adapter information... 33 Basic setup ... 5 Battery pack Information ... 33 Installing ... 8 Preparing and charging ... 8, 9 Replacement and handling ... 35 Call waiting ... 27 Caller ID service ... 29 Caller ID on call waiting ... 30 Deleting ...
Page 47
Thank you for purchasing a Uniden product. If you have any questions or problems, please.do.not.return.this.product.to.the.place.of.purchase. Our customer care specialists are here to help you! Visit our website at www.uniden.com or Having.Trouble? call our Customer Hotline at 1-800-297-1023 during regular business hours.* To order headsets, additional handsets, replacement batteries or other accessories, visit our Need.a.Part?