Hearth and Home Technologies TCT375 Installation Instructions

Models:
TCT375
Terra Cotta Termination Cap
This chimney termination cap has been tested for use with specific Hearth & Home Technologies fireplaces. Check with
your local building code agency before you begin installation to ensure compliance with local codes, including the need for
permits and follow-up inspections. If you encounter any problems regarding code approvals, or if you need clarification of
any of the instructions contained here, contact your Hearth & Home Technologies dealer. For the dealer nearest you, please
visit www.hearthnhome.com
Caution! Risk of Cuts/abrasions. Wear protective
gloves and safety glasses during installation. Sheet
metal edges are sharp.
WaRning! Risk of Fire. Intended for use with a
metal chase top only.
Hearth & Home Technologies • TCT375 Terra Cotta Termination Cap • 4014-033 Rev D • 02/16
tm
Figure 1 TCT375 Dimensions

Installation
Instructions
Note: An arrow () found in the text signifies change
in content.
1