Symptom
Can't make or receive calls.
The handset doesn't ring or
receive a page.
Severe noise interference.
The Caller ID does not dis-
play.
You cannot register the hand-
set at the base.
The handset doesn't commu-
nicate with other handsets.
An extra handset can't join
the conversation.
Suggestion
•
Make sure you are not too far from the base.
•
Make sure the line is not in use. If an outside call is already using a line,
you cannot use that line to make another outside call.
•
Check both ends of the base telephone line cord.
•
Make sure the AC adapter is plugged into the base and wall outlet.
•
Disconnect the AC adapter and reconnect.
•
Change the Digital Security Code (see page 49).
•
Make sure that you are not too far from the base.
•
Charge the battery in the handset for 15 to 20 hours by placing the handset
on the base or charging cradle.
•
Change the Digital Security Code (see page 49).
•
Keep the handset away from microwave ovens, computers, remote control
toys, wireless microphones, alarm systems, intercoms, room monitors, fl u-
orescent lights, and electrical appliances.
•
Move to another location or turn off the source of interference.
•
The call was placed through a switchboard.
•
Call your telephone provider to verify your Caller ID service is corrent.
There may be a problem with your Caller ID service.
•
Charge the battery pack in the handset for at least
15 to 20 hours.
•
Change the Digital Security Code (see page 49).
•
Change the Digital Security Code (see page 49).
•
Make sure you have registered all handsets.
•
Make sure there are not 2 handsets already using the conference feature.
•
Make sure that another handset is not in privacy mode.
50