Uniden DCT6465 Series Owner's Manual page 26

note
•When a Global setting
is changed from
one handset, this
affects all registered
handsets.
•For setting the day
and time, the idle
time-out is extended
to 2 minutes.
•When the area code
has already been
stored in memory, the
stored area code will
be displayed.
To change it, use
menu/del and number
keys to enter the new
area code.
[ 2 4 ] G E T T I N G S T A R T E D
Global Setup (All Registered Handsets)
Setting Day and Time
1) Enter the Global Setup menu, and then the Day & Time
submenu (see "Entering the Menu" on page 20).
2) Press ring/vol/∧ or ring/vol/∨ to select the day of the
week, and then press select/
3) Press ring/vol/∧ or ring/vol/∨ to set hour and then
press select/
.
4) Press ring/vol/∧ or ring/vol/∨ to set minute and then press select/
5) Press ring/vol/∧ or ring/vol/∨ to choose
You will hear a confirmation tone.
Setting CIDCW (Caller ID on Call Waiting)
1) Enter the Global Setup menu, and then the CIDCW
submenu (see "Entering the Menu" on page 20).
2) Press ring/vol/∧ or ring/vol/∨ to select
/ , or
C W O n C WD X O ff C W O ff
select/ . You will hear a confirmation tone.
Setting the Area Code
1) Enter the Global Setup menu, and then the Area Code
submenu (see "Entering the Menu" on page 20).
2) Press the number keypad (0-9) to enter a 3-digit
area code.
3) Press select/ . You will hear a confirmation tone.
.
or , and then press select/
A M P M
/
C W On C W DX O n
/ , and then press
CW DX Of f
.
.
,
w w w . u n i d e n . c o m