Setting the Call Screen
1) Enter the Answ. Setup menu, and then the Call Screen
submenu (see "Entering the Menu" on page 22).
2) Press ring/vol/∧ or ring/vol/∨ to select
3) Press select/
. You will hear a confirmation tone.
Global Setup
Setting Day and Time
1) Enter the Global Setup menu, and then the Day & Time
submenu (see "Entering the Menu" on page 22).
2) Press ring/vol/∧ or ring/vol/∨ to select the day of the
week, and then press select/
3) Press ring/vol/∧ or ring/vol/∨ to set hour, and then
press select/
.
4) Press ring/vol/∧ or ring/vol/∨ to set minute and then press select/
5) Press ring/vol/∧ or ring/vol/∨ to choose
You will hear a confirmation tone.
Setting CIDCW (Caller ID on Call Waiting)
1) Enter the Global Setup menu, and then the CIDCW
submenu (see "Entering the Menu" on page 22).
2) Press ring/vol/∧ or ring/vol/∨ to select
C W O n
/
C WD X O f f
, or
select/
. You will hear a confirmation tone.
w w w . u n i d e n . c o m
O n
or
.
or
A M
C W On
C W O f f
/
CW D X O ff
and then press
Of f
.
.
and then press select/
P M
/
,
CW DX O n
note
•When a Global
setting is changed
from one handset,
this affects all
registered handsets.
•You can set the clock
.
either by the handset
or base (see "Setting
the Time" on page 54).
•For setting the day
and time, the idle
time-out is extended
to 2 minutes.
G E T T I N G S T A R T E D [ 2 7 ]