Table of Contents
Advertisement
OWNER'S MANUAL
Basic Operation
1. Reset the Unit
When operating the unit for the first time
or after replacing the car battery, you mu-
st reset
the unit.
Press @ RES button on the base with
pointed object (such аз ball-point pen)
to set the unit to initial status.
Note:
* This function can only be operated on the head unit.
* Pressing RES button will erase some memorized
function,
2. Turn the Unit On/Off
Press CD PWR button to tum on the unit,
press it again to tum off the unit.
Note:
* Pressing Ф POWER button onthe bead unit per-
боша the same operation.
'* When the unit is tumed on, insert a disc, the dise
'willbe played atomically
3. Volume Control
Press (I3) VOL button to increase the
'sound level and press (13) voL- button
to decrease
the sound level.
Note:
* The default volume level is 15. After the unit is
ой, if the volume level is higher or lower than this
default level, й will resume to 15.
* Тыз faction can only be operated on the remote
control.
4. Pause the Playback
During playback mode, press CED эя
bution to switch between playback and
pause; during stop mode, press it to resu-
me to normal playback.
Nee
® Pressing bats on the bes unit performs the
same operasion.
410»
Advertisement
Table of Contents
