ASROCK WRX90 WS EVO User Manual page 65

Addressable LED Headers
(3-pin ADDR_LED1) (see p.6, No. 10)
(3-pin ADDR_LED2) (see p.6, No. 44)
These headers are used to connect Addressable LED extension cables which allow users to
choose from various LED lighting effects.
Caution: Never install the Addressable LED cable in the wrong orientation; otherwise,
the cable may be damaged.
Connect your Addressable RGB LED strips
to the Addressable LED Headers (ADDR_
LED1 / ADDR_LED2) on the motherboard.
1. Never install the Addressable LED cable in the wrong orientation; otherwise, the cable
may be damaged.
2. Before installing or removing your Addressable LED cable, please power off your system
and unplug the power cord from the power supply. Failure to do so may cause damages to
motherboard components.
1. Please note that the Addressable LED strips do not come with the package.
2. The Addressable LED header supports WS2812B addressable RGB LED strip (5V/
Data/GND), with a maximum power rating of 3A (5V) and length within 2 meters.
WRX90 WS EVO
ADDR_LED1
VOUT
DO_ADDR
GND
1
ADDR_LED2
1
GND
DO_ADDR
VOUT
1
61