Technics SA-EX100 Service Manual page 3

SA-EX100
| Ш Operation Checks and Мат Component Replacement Procedures
"ATTENTION SERVICER" Some chassis components may have sharpe edges. Be careful when
disassembling and serving.
1. This section describes procedures for checking the operation of the major printed circuit boards and
replacing the main components.
2. For reassembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
3. Select items from the following index when checks or replacement are required.
е Contents | page
e Checking Procedure for Major P.C.B, ...................... аннан нынын ыы нынын 3-4
е Replacement of Power ІС and Regulator Transistor
(?
()
е Replacement of the Fan Motor
Ш Checking Procedure for Major P.C.B.
СЕ Remove the
Top cabinet.
(Black) (Black)