Recharging Batteries; Using The Cigarette Lighter Power Cord; Using An Optional Ac Adapter - Uniden PRO340XL User Manual

Recharging Batteries

You can recharge nickel-cadmium batteries while they are installed in the
PRO340XL. Use the included Cigarette Lighter Power Cord or an optional AC
Adapter (AD140U). Be sure to observe the polarity of the Adapter before
connecting it to the radio.
Note: The PRO340XL will not operate while the batteries are recharging.
Do not attempt to charge alkaline batteries in this radio. Make sure you
have installed 10 rechargeable nickel-cadmium batteries before
connecting power to the charge connection.

Using the Cigarette Lighter Power Cord

IMPORTANT: The Cigarette Lighter Power Cord is designed to be used
1. Plug one end of the Cigarette Lighter Power Cord into the CHARGE
connection on the side of the PRO340XL.
2. Plug the other end of the Cigarette Lighter Power Cord into the vehicle's
cigarette lighter socket.

Using an optional AC Adapter

IMPORTANT: Make sure you use only a Uniden AD140U AC Adapter.
1. Plug one end of the AC Adapter into the CHARGE connection on the side
of the PRO340XL.
2. Connect the other end of the AC Adapter to an AC power source.
Note: Typical charging time is 12 hours.
WARNING
ONLY with negative ground vehicles. Do not attempt to
charge the batteries with the power cord connected to a
positive ground vehicle.
11