OPERATION
B B> To fade in -the irput source selected by ASSIGN B and fade out the
input source selected by ASSIGN A.
C. Ttie center: To mix the input source selected by ASSIGN A and ASSIGN B
earually
8.USING THE ECHO (PM-8501/PM-8QC1)
A The echo mode is applied to the sound after all the inputs are mixed
B. Set the ECHO ON/OFF to ON to turn on the echo mode and activate the
DELAY and REPEAT functions.
C. The DELAY control lets you include a measured time delay to simulate on
echo
Set DELAY towards lO for a maximum time delay and towards 0 for
a minimum time delay.
D The REPEAT control lets you control the length of lime a tone is repeated
(reverberation). Set REPEAT towards 10 for the longest time and towards 0
for the shortest time.
E.The LEVEL control lets you control the output level of the echo effect
Set LEVEL towards 10 for raising the level and towards 0 for lowering the
level
9.USING THE SOUND EFFECT <PM-850l/PM-750l>
A.There are six pre-program ed sound effects for your selection, LASER,
MACHINE GUN, TRON BLAST. SIREN. EMERGENCY, and UFO.
Press any button of sound effects to generate* the sound you wish to mix.
it will play continously until you release the button to stop
B The SPEED Control. Lets you adjust the pitches of the effects.
C.The VOLUME Control' Lets you adjust the volume of the effects
13