Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
Please install a suitable all-pole
switch with a contact separation of
more than 3 mm (site supplied).
Please use the switch with rated
current above 10 A.
Otherwise, it may cause a short circuit,
thus resulting in a fire.
Do not install the outside air inlet in
places where combustible gases or
any other exhaust gases may enter
the product.
Otherwise, it may cause indoor hypoxia
or air pollution, or even result in a fire.
Do not install the product or the
room air inlet in places such as
machinery plants, chemical plants or
research facilities where harmful
gases or gases containing corrosive
ingredients, including acid, alkali,
organic solvent and paint, are
generated.
Otherwise, it may cause poisoning, or
result in a fire due to internal corrosion
or deterioration of the product.
Do fix this product securely.
Otherwise, it may fall off and cause
personal injury.
Components must be installed
securely.
Otherwise, it may fall off and cause
personal injury.
Owing to the different installation
position for special purpose circuit
breaker, please install an anti-creep
circuit breaker.
It may cause electric leakage if anti-creep
circuit breaker is not installed.
WARNING
Avoid the back-flow of gas into the
room from an open flue with
flammable gas or other open-fire
appliances.
Otherwise, it may cause fire.
Do not install the product or the
room air inlet in places with heavy
cooking oil fumes.
Cooking fumes
Do not install in location where the
product may be exposed to the
combustible gas leakage.
In case gas accumulates around the
product, it may cause the fire.
CAUTION
Do not install the outside air inlet
close to a pollution source.
Otherwise, it may pollute the indoor air.
The special-purpose or dedicated
parts, such as mounting fixtures,
must be used if such parts are
provided (include the accessories).
Otherwise, it may fall off to cause
personal injury.
Please wear gloves and other
protective tools.
Otherwise, it may cause personal injury.
Otherwise, it may cause
odor pollution. The
ERV
filter or the heat
Room air inlet
exchange core cannot
be used after it is
clogged with oil;
otherwise, it may cause
a fire.
3
Advertisement
Table of Contents
