Table of Contents
Advertisement
ACCESSORIES
STANDARD ACCESSORIES INCLUDED
Probe (PC-30) ss siscsvcsssdieseasesseetecncerangeceeees Y87-2260-00
Attenuation. .........cccccsececneeseseeeneneeneeseneneeees 1/10, 1/1
Input Impedance
VITO ic ovedies oviedeeede
bios teteisdoecados 10 MQ, 22pF +10%
We Rear
roeereereeer: peecrmenere 1 MQ, 200pF or less
Instruction Manual...........2.2--.cseeceeeeeeeneenees B50-7570-30
Replacement Fuse
OLB A ssscccucaleenckoet
Sin verneecdeaunse oazescuts FO5-8015-05
OLD A ccccisieclaasetl
cSeteeetees tie snctewectacene FO5-5022-05
OPTIONAL ACCESSORIES
Probe Pouch (MC-78)........:.:esscseecceseseneenens Y87-1600-00
Fig. 28
Washer
Grommet
Plunger
MOUNTING THE PROBE POUCH (MC-78)
This soft vinyl pouch
attaches
to the right side of the
oscilloscope housing and provides storage space for two
probes and the operators manual.
Install the probe pouch
as follows:
1. Unsnap the probe pouch from the retainer plate.
2. Align the retainer plate with the 4 holes on the right side
of the case, with the 3 snaps at the top.
3. Attach
the four corners
of the retainer
plate to the
oscilloscope case with the four nylon rivets supplied.
4. Attach the probe pouch to the retainer plate using the
snap fastener.
Retainer Plate
} nylon rivet
29
Advertisement
Table of Contents
