Using The Memory Preset Function - Sony XR-3320 Operating Instructions Manual

Using the Memory Preset Function
: = ; Stations with clearest
[4] ae = reception are automatically
; = searched and memorized
om ata on each band (FM1, FM2,
e) FM3 and AMI, AM2).
Up to 6 stations on each
band can be stored on the
preset number buttons 1 to
1 2 6 in the order of frequency.
Memorizing the Stations Automatically Fs
— BTM (Best Tuning Memory) Function Fy
2
. Select the desired band. The receivable frequeny ranges &
of FM1, FM2 and FM3 are the 3
same. 9
Therefore, 18 stations can be
memorized on FM.
") Press the M.SCAN/BTM button more than two seconds.
eo >
M SCAN
STM o
The BTM function
'The BTM function searches all the receivable stations within
'he currently selected band and memorizes the ones in
300d receiving conditions in sequence from the lowest
'requency.
Note
There may be cases where there
are not enough receivable
stations due to the lack of stations
in the vicinity or weak
broadcasting signals. In such
cases, the BTM operation may
stop without all the buttons being
occupied with memories.
itow to memorize the stations on the preset number
lguttons
-— When there is no preset number indicated on the display
window, all the preset number buttons set in the currently
selected band will be filled with the memories.
-— When there is a preset number indicated on the display window,
the unit will memorize the stations on the preset number buttons
from the one currently being displayed. For example, when you
chouse FM1 and preset number 3 is being displayed, the
operation will start from the preset number 3 on FM1 and stops
at the preset number 6 on FM3.