Orion COBALT Series Installation Manual page 15

Depending on the Stereo/Mono button setting, the CO 2100 can be configured in a variety of
systems. The following system designs show examples of CO 2100 uses in systems with its
button in mono setting. The system shown in Fig. 8A, the mono button is in and the left input
is in use (full range mono mode). In the system shown in Fig. 9A, the mono button is in and the
right input is in use (crossover mode, low pass only). Using more than one CO 2100 amplifier in
your system will allow greater flexibility in it's design.
SUB ONLY SYSTEM
Fig. 9A. An example of CO 2100 amplifiers, configured for sub input (button in). Each
amplifier feeds a CO 10 sub-woofer.
11