EAM30485
REMOVING THE OIL PUMP
1. Remove:
• Oil pump
2. Loosen:
• Balancer nut "1"
• Primary drive gear nut "2"
• Balancer weight gear nut "3"
TIP
Place an aluminum plate "a" between the teeth
of the balancer drive gear "4" and balancer
weight gear "5".
1 1 1
4
4
2
2
4 4
3. Check:
• Primary drive gear "1"
• Balancer drive gear "2"
• Balancer weight gear "3"
Wear/damage Replace.
5 5
a a a
a a a
3 3
5 5
5-62
1
4. Check:
• Balancer
Crack/damage Replace.
EAM30136
CHECKING THE OIL PUMP
1. Check:
• Oil pump cover
• Oil pump drive shaft
• Oil pump housing
Cracks/damage/wear Replace the defec-
tive part(s).
2. Measure:
• Inner-rotor-to-outer-rotor-tip clearance "a"
• Outer-rotor-to-oil-pump-housing
"b"
• Oil-pump-housing-to-inner-rotor-and-outer-
rotor clearance "c"
Out of specification Replace the oil pump.
OIL PUMP
2
3
clearance