General Chassis; Removing The Left Side Cover; Removing The Seat; Removing The Number Plate - Yamaha YZ 2019 Series Owner's Service Manual

EAM30015

REMOVING THE LEFT SIDE COVER

1. Remove:
• Bolt (side cover)
• Side cover "1"
TIP
Draw the left side cover "1" backward to remove
it because its projection "a" is inserted in the rear
frame.
1
a
EAM30016

REMOVING THE SEAT

TIP
The fuel tank cap cover and the seat are coupled
with each other with a plastic band.
When removing the seat, always remove the
fuel tank cap cover beforehand.
1. Remove:
• Fuel tank cap cover "1"
Refer to "FUEL TANK CAP" on page 1-19.
1
2. Remove:
• Seat "1"
1
1
4-2

GENERAL CHASSIS

EAM30371

REMOVING THE NUMBER PLATE

1. Remove:
• Bolt (number plate)
• Number plate "1"
TIP
• The projection "a" is inserted into the band of
the number plate. Pull the band off the projec-
tion before removal.
• Remove the clutch cable "2" from the cable
guide "b" on the number plate.
• The projection "c" on the lower bracket is in-
serted into the number plate. Remove the
number plate by pulling it off the projection.